24940 manual 8/19/03 9:04 AM Page 12
CHAN +
VOL
AUDIO
Programming For CD
1. Manually turn on the CD player. Find
the three digit code for your CD player you
wish to control at the back of the instruc
tions.
2. Press and hold the CODE SEARCH but
ton until the INDICATOR LIGHT lights,
then release the CODE SEARCH button.
3. Press and release
the CD button (The
INDICATOR LIGHT
will blink then remain
lit.
LIGHT
CODE
SEARCH
INDICATOR
4. Enter the code using
ON•OFF
1
2
3
4
5
6
7
8
9
0
CD
the Number Buttons.
After your code is
entered, the INDICA-
(BLINK)
TOR LIGHT will turn
off. If the code is not
valid, the INDICATOR
LIGHT will blink.
Check the code list and
repeat process.
(OFF)
5. Aim the remote at
the device you wish to
control and press the
ON•OFF button. The
device should turn off.
6. With your device
on, press CHAN+
CHAN +
(Channel Up). If the
device responds, no fur
ther programming is
required.
NOTE:
If your device does not respond, try
all the codes for your brand. If the codes do
not work, or your brand is not listed, try the
Code Search method on Page 12.
7. Enter your code and the
type of device you
CD CODE
programmed here for easy reference.
11
