24940 manual 8/19/03 9:04 AM Page 13
RCVR
LD
RCVR
LD
Programming For AUX 1 or AUX 2
Buttons
With the AUX 1 and AUX 2 buttons, you can
assign a second TV, DVD, CD player, VCR,
Satellite System, or Cable Box to it.
1. Manually turn on the
device you wish to con
trol. Find the three digit
code for the device you
wish to program in the
code list at the back of
the instructions.
LIGHT
CODE
SEARCH
INDICATOR
2. Press and hold the
CODE SEARCH button
until the INDICATOR
LIGHT lights, then
release the CODE
SEARCH button.
3. Press and release the
AUX 1 or AUX 2 button
(The INDICATOR LIGHT
will blink then remain
lit.)
4. Enter the code using
the Number Buttons.
After your code is
entered, the INDICATOR
LIGHT will turn off. If
the code is not valid, the
INDICATOR LIGHT will
blink. Check the code list
and repeat process.
5. Aim the remote at the
device you wish to con
trol and press the
ON•OFF button. The
device should turn
off.
TV
VCR
CABLE
DBS
CD
AUX 1 CODE
AUX CODE
DVD
6. With your device
on, press CHAN+
(CHANNEL UP) but
ton. If the device
responds, no further
programming is
required.
TV
VCR
CABLE
DBS
CD
AUX 2 CODE
AUX CODE
DVD
NOTE:
If your device does not respond, try
all the codes for your brand. If the codes do
not work, or your brand is not listed, try the
Code Search method on page 12.
7. Enter your code and the type of device
you programmed here for easy reference.
CHAN +
ON•OFF
1
2
3
4
5
6
7
8
9
0
(OFF)
(BLINK)
ON•OFF
OR
AUX
12
