background image

12

Trouble Shooting

Problem

No device buttons
light when you
press any key

The remote does 
not operate your 
device

Not  performing 
commands 
properly

Problems 
programming 
a TV/VCR  Combo 
Unit

VCR not 
recording

Problems chang-
ing channels

No response 
after pressing 
a key

Solution

A) Replace the batteries

(with fresh, new AAA
Alkaline batteries). 

B) Check that batteries are

properly installed.

A) Try all the codes listed

for your brand.

B) Try the Code Search

method (page 8).

Start Code Search over again
to locate the proper code.
NOTE: Some functions of 
certain brands/models may
not be operable.

Try the VCR code for your
brand. Some combo units,
however, may require both a
TV and a VCR code for full
operation.

As a safety feature on your
remote, you must press the
REC button twice.

If your original remote
required ENTER after a chan-
nel, press ENTER after you
select a channel.

A) Make sure you have 

new batteries, and you
are aiming your remote 
at your devices.

B) Check that batteries are

properly installed. See
page 2.

C) Check that nothing is

blocking the line of sight
of your infra-red reciever
in your equipment.

Reprogramming may be required after
batteries are removed.

24961 manual/NOSPAN  12/11/03  9:33 AM  Page 13

This Manual: http://www.manuallib.com/file/2589422

Summary of Contents for RM24961





















Reviews: