5
4
SETUP
SLEEP
ENTER
VOLUME UP/DOWN
Changes the volume
level of the product,
normally the TV.
NUMBERS
Enter numbers for direct
channel selection. Some
products require ENTER to
be pressed after channel
selection.
CHANNEL UP/DOWN
Changes the channels.
Also controls MENU
navigation in TV, DVD or
SAT mode for many
brands/models.
Button Functions, cont.
SHIFT
Press and release to
access buttons labeled in
blue (red indicator stays on).
Press again to exit Shift
mode.
MENU
Press and release
SHIFT
then
MENU
to display
the menu on the TV. The red LED is on continuously to
indicate the remote is in Menu mode, VOL UP/DOWN
buttons operate as cursor right/left, CH+/- buttons
operate as cursor up/down, and Mute operates as OK.
Press
LAST/EXIT
button to exit Menu.
DISP
Display button shows date and time if your TV or
VCR has that feature.
POWER
Turns
product On or Off.
RECORD, PLAY, STOP, REW, FF, PAUSE
VCR
control buttons operate your VCR even
when the remote is set to operate the TV.
Also operates DVD Scan -/+. Note the VCR
keys also control DVD when in DVD Mode.
Note: The
REC
button must be pressed
TWICE to record from your VCR. For some
brands of VCRs, you might need to press
the
REC
button once, then press it again for
three seconds.
CC
TV Closed
Caption (if your TV
has this feature) or
DVD Subtitle toggle.
Some buttons on the remote might have functions that
are referred to by different names on the device you are
controlling. E.G.
LAST
may be called RECALL, or
DISPLAY
may be called INFO. These differences
depend on the brand and model of your product. Also,
this remote can only operate features that exist on your
product. E.G., your product must have
LAST
ability for
the
LAST
button to operate this feature.
ENTER
For some TV models,
used after direct channel
number entry to immedi-
ately change to the
selected channel.
TV, DVD/VCR,
SAT/CBL.
Selects
product to be
operated.
SETUP
For setup.
Red Indicator
Lights when any
button is pressed.
Button Functions
MUTE
Turns off the
TV sound while the
picture remains.
OK
Selects menu
items for the device
you are controlling.
INPUT
selects the video
input of your TV.
SLEEP
enables the
remote to turn off your
TV after a period of 1 to
99 minutes.
EXIT
Exit On-Screen Menus
and/or Return to previous
On-Screen selection.
LAST
Returns to the
previously selected channel.
The most commonly used buttons are accessible even
with the remote “closed” as shown below. Just flip it
open to gain access to less frequently used buttons.
