GE RM24964, Instruction Manual

11

10

Volume/Mute Control and Punch-
Through

This remote lets you select which device Mode
controls your Volume/Mute buttons. The remote is
initially set for all device Modes to use their own
Volume/Mute control if present. If the programmed
code has no Volume/Mute operation of its own then
those buttons will punch-through control to the 

TV

Mode device without the need to change to

 TV

Mode.

Any Mode chosen for Volume/Mute control
MUST have its own Volume/Mute function or
the Volume/Mute buttons will do nothing.

Setting ALL Volume/Mute Control to
any one Mode

This routine can set all Modes to “punch-through” to
any one chosen Mode for Volume/Mute button
control without the needing to change to that Mode.

Using Your  Remote,  cont.

1. Press and hold the 

SETUP

 button until

the red indicator turns on, then release
the button.

2. Press and hold the 

MUTE

 button until

the red indicator blinks off, then release
the button.

3. Press and release the desired Mode button

(

TV

, 

VCR

, etc.) for Volume/Mute control,

the red indicator blinks then stays on.

4. Press and release the 

MUTE 

button and

the red indicator turns off. The red
indicator will blink rapidly for three
seconds if the Mode you have selected
has no Volume/Mute control.

All other Modes will now punch-through to your
chosen Mode for Volume/Mute control.

Using Your  Remote,  cont.

Controlling Devices with Separate
Power On and Off Buttons

Some GE, RCA and ProScan models require you to
press the device button for more than one second
to turn the device on and the 

POWER 

button to turn

the device off.

Controlling Combo Devices

Some Combo devices (e.g. TV/VCR, TV/DVD,
DVD/VCR, etc.) will require you to set up two
different Mode buttons to control both parts of the
Combo device. For example, if you have a TV/DVD
Combo, you might need to set up one code under
the 

TV 

button to control the TV part AND a

separate code (under any other Mode button) to
control the DVD part.

VCR/DVD Punch-Through

This remote allows the 6 VCR transport buttons
(i.e. 

PLAY

, 

PAUSE

, 

STOP

, 

FF

, 

REWIND

, and 

REC

)

to Punch-Through control from any Mode
programmed with TV, SAT or Cable codes to the
last 

VCR

, or 

DVD

 programmed Mode you used.

This feature will not operate if the programmed TV,
SAT or Cable code has its own VCR transport
button control e.g. a TV Combo, SAT/PVR, etc.

SETUP