Chapter 7
Page no. 590
JC-ELE-A-020.fm
GE Healthcare
Senographe DS
Revision 1
Service Information and Procedures Class A 2385072-16-8EN
Job Card ELE A020 - Declare and Set Printers (Filming Devices)
7
PRINTER PARAMETERS
This section gives information on entries to be made in the
DICOM Parameters
window for printers qual-
ified for use with the Senographe system.
7-1
Konica Printers
7-1-1
Konica 793 DICOM Printer
•
DICOM printer label: Any name you wish to see appearing on the Film Composer, e.g., Konica
DPRO793.
•
Hostname: Use printer Hostname if any, or a name unique to your Network, e.g., dpro793.
•
Network address: A unique IP address given by the hospital Network Administrator), e.g.,
3.48.16.135.
•
Application Entity Title (AET):
Must be
DPRO793
•
Port number:
Must be
104
•
Layouts:
Must be
1 x 1
, 1 x 2
, 2 x 1
, or 2 x 2
•
Film size:
Must be
8 in x 10 in W = 4596 H = 5674
10 in x 12 in W = 5766 H = 6826
•
Pixel size
43.75
•
Configuration information
Must be
KC_
LUT=1
•
Density
Must be
Min: 20 Max: 400
•
Magnification type:
Must be
Cubic
•
Smoothing factor:
Must not contain any value
•
Trim:
Must be
NO
•
Printer Memory Size
Must be
1024
