GE Healthcare
Senographe DS
Revision 1
Service Information and Procedures Class A 2385072-16-8EN
Job Card D/R A251 - Paddle Holder Board
Page no. 1331
Chapter 9
JC-DR-A-251.fm
Job Card D/R A251 - Paddle Holder Board
Chapter 9
1
SUPPLIES
Determine whether you have a Paddle Holder Board with or without DIP switches. To do this, remove
the Paddle Holder Cover and view the left hand side of the Paddle Holder Block where the earth cable
is connected (see below).
Order the appropriate Paddle Holder Board according to the type already present in the Gantry.
•
(PN 2369391) if the existing Paddle Holder Board does not have a set of DIP
switches.
•
(PN2369391-2) if the existing Paddle Holder Board does have a set of DIP
switches.
2
TOOLS
3
REQUIRED EFFORT
Personnel: 1 Field Engineer
Time: 30 minutes
4
SAFETY PRECAUTIONS
WARNING
The Gantry must be powered off.
Without DIP switches
With DIP switches