GE Healthcare
Senographe DS
Revision 1
Service Information and Procedures Class A 2385072-16-8EN
Cable Lay-out and Pin-out
Page no. 321
Chapter 3
Cables.FM
1-87. W507 – Filter Wheel DC Motor Connect
Filter Wheel DC motor (M5) to Interconnection board (PI 2376693) M5:
1-88. W508 – Rectangular Blade Unit DC Motor Connect (Maxon)
Four cables, used to connect the rectangular blade DC motor connectors (M1 through M4) to the Inter-
connection board connectors M1 through M4 (board PI 2408939).
Connectors Mx in the table below correspond to the following:
Front blade - M1; Left blade - M2; Rear blade - M3; Right blade - M4
1-89. W509 – Filter Wheel DC Motor Connect (Maxon)
Filter Wheel DC motor (M5) to Interconnection board (PI 2408939) M5:
Designation
Level
Pin No.
Motor -
0/24 V
M5-1
Motor +
0/24 V
M5-2
GND
0 V
M5-3
VCC
5 V
M5-4
Channel B
0/5 V
M5-5
Channel A
0/5 V
M5-6
Designation
Level
Pin No.
Motor -
0/24 V
Mx-1
Motor +
0/24 V
Mx-2
GND
0 V
Mx-3
VCC
5 V
Mx-4
Channel B
0/5 V
M5x5
Channel A
0/5 V
Mx-6
Designation
Level
Pin No.
Motor -
0/24 V
M5-1
Motor +
0/24 V
M5-2
GND
0 V
M5-3
VCC
5 V
M5-4
Channel B
0/5 V
M5-5
Channel A
0/5 V
M5-6