GE Reason Switches
Chapter 7
– Configuration
130
REASON SWITCHES-TM-EN-3
2
System Management Setting
2.1
System Management Setting
System Information Configuration menu allows the user to configure an intuitive and
friendly-to-use name. This is useful when using management protocols, such as
SNMP or LLDP. These protocols will send the switch name in its messages in order to
make network management and diagnosis much easier.
System Information Configuration menu is located at Settings System
Information.
Allowed configuration is as shown below.
System Contact:
In the Contact information field should be named the personnel responsible for this
switch. Allowed string length is up to 255 and allowed characters are the ASCII
characters from 32 to 126 (basically letters, number
s and other characters, such as “
-
“ or “_”).
System Name:
Administratively name for switch. This field is, by convention, the fully qualified
domain name (FQDN). The first character must be an alpha character, and space
character is not allowed. Allowed string length is up to 255, and allowed characters
are strings drawn from the alphabet (letters), numbers and minus (“
-
“) signal.
System Location:
Identification of where this switch is installed. Allowed string length is up to 255 and
allowed characters are the ASCII characters from 32 to 126 (basically letters,
numbers and other characters, such as “
-
“ or “_”).
After change one of the configurations described before, the user may save or
discard them.
o
Save
: save configuration at the Running Config;
o
Reset
: undo changes made locally at the Running Config
.
2.2
IP Services
IP services menu allows the user to configure the IP related setting. IP address (per-
VLAN) static or dynamically received by a DHCP server configuration is allowed. It is
also possible to configure DNS servers to be used by the switch for management
interface access. IP routes to be used by the management interfaces can be
Summary of Contents for T1000
