Chapter 7
– Configuration
GE Reason Switches
REASON SWITCHES-TM-EN-3
145
o
Authentication Method Configuration
: define how the user will be
authenticated when accessing through each interface (console,
SSH, Telnet or HTTPS). First column is the main method. After a
timeout of the main method of authentication, the method
selected at the second column will be tried. Finally, after the
timeout of the second chance, it will be tried to authenticate the
user by the method selected at the third column.
Local
: authentication of this client will be done locally
through equipment database;
Radius
: authentication of this client will be done remotely
through a Radius server;
Tacacs
: authentication of this client will be done remotely
through a server;
No
: authentication is disabled in this client and login is not
possible.
o
Command Authorization Method Configuration
: define how the
user will be authenticated when using the CLI (Command Line
Interface) when accessing from console, SSH or Telnet.
Method: select the authentication method of this client.
Allowed methods are:
Tacacs: authentication of this client will be done remotely
through a server;
No: authentication is disabled in this client and login is not
possible.
Cmd LvI: allow all commands of this client with privilege
level higher than the Cmd LvI value. That is, this value will
be the lowest Privilege Level required to use the CLI
interface. Valid values are from 0 to 15;
Cfg Cmd: enable configuration commands at this
interface.
o
Accounting Method Configuration
: define how the user will be
authenticated when doing users’ accounting (console, SSH or
Telnet).
Method
: select the authentication method of this client.
Allowed methods are:
Summary of Contents for T1000
