Critical Power
Modifications reserved
Page 32/91
GE_UPS_USM_TLE_SUL_M16_M50_2bU_V010.docx
User Manual
TLE Series 160 - 500 UL S2B
LOAD SCREEN
Voltage L1 / L2 / L3
Output voltage PHASE/NEUTRAL for
each phase.
Current L1 / L2 / L3
The output current as RMS values for
each phase.
Percent load L1 / L2 / L3
The output Load as percentage for each
phase.
Active power
Load active power (kW) for each phase.
Apparent power
Load apparent power (kVA) for each phase.
Power factor
Load power factor: + inductive load / - capacitive load
Status
Source of the power supplied to the Load.
Inverter operating time
Total operating time for the Inverter (in hours).
Apparent power
Total apparent Load power (kVA).
UPS operation time
Total operating time for the UPS (in hours).
Active Power
Total effective Load power (kW).
eBoost operation time
Total operating time for the UPS in
eBoost™ Operation Mode
(in hours).
This counter is displayed only when
eBoost™ Operation Mode
is available
(option).
Overload counter
Total number of detected output overloads.
IEMi operation time
Total operating time for the UPS in
IEMi Operation Mode
(in hours).
This counter is displayed only when
IEMi Operation Mode
is available (option).
BOOSTER SCREEN
Battery voltage
The battery voltage.
Battery current
The battery current (negative values
correspond to the discharge of the
battery).
Voltage DC-link 1
DC-link 1 voltage.
Voltage DC-link 2
DC-link 2 voltage.
Status
Booster status (Off / Booster / Charger).
Temperature
Temperature of the 4
th
leg’s bridge.
Temperature a
Booster temperature (lower module).
Temperature b
Booster temperature (upper module).
