Critical Power
Modifications reserved
Page 14/146
GE_UPS_OPM_TLE_SCE_M60_M80_1GB_V020.docx
User Manual
TLE Series 600 & 800 CE S1
3
INTRODUCTION
The
TLE Series 600 & 800
Uninterruptible Power Supply
(UPS) provides the energy supply for critical
loads which need a reliable, continuous free from voltage disturbances and frequency fluctuations
supply.
In case the power provided by the
Mains Fails
, or exceeds the permitted tolerances, the power to supply
the
Load
is provided by the
Battery
for the specified time at the rated
Load
(or longer at a reduced
Load
)
or until the
Mains
power returns.
TLE Series 600 & 800
is a truly
VFI
double conversion
Uninterruptible Power Supply
(UPS), equipped with
automatic bypass
, where the
load
is normally supplied by the
inverter
.
TLE Series 600 & 800
can be configured, if chosen, for the
eBoost™ Operation Mode
(Option - High efficiency: up to 99% / Fast power transfer: <2ms) permitting
maximum energy saving.
If the
Inverter
is not able to supply the required
Output Voltage
, or when overload or
short-circuit on the output occur, the
Load
is instantly transferred to the
Mains
via
the
Automatic Bypass
.
The UPS automatically returns to normal mode when the failure condition is
restored.
KEY FEATURES
:
More Critical equipment supported
Rated at 1 Power Factor,
TLE Series 600 & 800
delivers more real power than other UPS in the market.
With today’s trend toward power factor corrected loads,
TLE Series 600 & 800
can support more total
Load
than any other UPS available, allowing y
ou to support a greater number of today’s enterprise
computing
Power Factor Corrected (PFC)
equipment.
High Efficiency
Thanks to type
Advanced Neutral Point Clamped
three level
IGBT
technology,
TLE Series 600 & 800
guarantees a high overall performance.
Intelligent Energy Management
(IEM)
combined with
RPA
, results in the most cost efficient and reliable
UPS solution in the industry.
Fully digital
Digital Signal Processor (DSP)
,
Flash memory
and
Advanced Neutral Point Clamped
are the technology
corner stones of a new age of power quality and power reliability.
RPA™
-
Redundant Parallel Architecture™ Parallel System
GE’s Critical Power
provides a unique technology called
Redundant Parallel Architecture™ (RPA™)
that
can parallel Uninterruptible Power Supply (UPS) modules with true redundancy.
With
RPA™
, there is no need for external electronics or switches to control the UPS modules in the
parallel system.
One of the UPS modules in the system arbitrarily takes a leadership role, while the other UPS modules
have access to all control parameters.
If one UPS fails to operate, the load is automatically redistributed among the others.
If the lead UPS fails to operate then a different UPS automatically takes on the leadership role.
The
RPA™
systems are designed to have no single points of failure, ensuring the highest level of power
protection for critical loads.
Extremely flexible
Tailor made power protection to meet your individual installation requirements;
TLE Series 600 & 800
offers various options like
EMC filter
and our comprehensive
software
for mission control and data
protection to cover all your application needs.