Secure Perfect 6.1.1 User Manual
252
Status Tab
Digital Output Status Form
This form displays the status of the selected digital outputs according to the information in the micro’s
database, by Reader DO or other DOs, by micro or for all micros.
Select DO Type
•
Select Reader to display the DO points available for the readers.
•
Select Other to display Aux DOs (the two DO relays available on a 2RP board) and other DO
points. Example DO points include lights, sirens, and door strikes that may be connected to
the micro.
Select Micro
•
Select All to display the status for the digital outputs of the type selected in the field Select
DO type found on all micros.
•
Select By Micro to display the status for digital outputs of the type selected in the field Select
DO type found on a selected micro. Click the drop-down list to display active micros.
Refresh
Click to get an updated status on the digital outputs. A refresh for a dial-up micro will cause the host to
dial the micro unless they are already connected.
The refresh process may take a few minutes.
A refresh selected for an offline micro or micro in error will never be returned.
Column Descriptions:
•
DO Number
: Number of the digital output.
•
Description
: Description of the door/DO in the database.
•
Micro
: Number of the micro on which this digital output is found.
•
Current State
: Displays the state of the digital output.
•
Date
: Displays the date that the status was requested.
•
Time
: Displays the time that the status was requested.
If this is a reader DO, the states are:
•
Lock
: The door is locked.
•
Unlock
: The door is unlocked.
If this is any other DO, the states are:
•
Active
: The digital output is in the Active state defined on the Digital Output Form.
•
Inactive
: The digital output is NOT in the Active state.
Status Tab
Digital Video Recorder Form
Perform a search, select a DVR from the right pane of this form window, and click
Status
. The DVR must
be online in order to display a Status pane conveying the following information about the selected DVR:
•
General Status
: Current time, time powered on, MUX firmware, PPC firmware, and disk
capacity.
•
Camera Status
: Current in alarms and current in video loss alarms.
•
Record Status
: Record status, disk status, time recording, and time until disk is full.
•
Archiving Status
: Archive status, device status, time archiving, and time until archive is full.
•
Ethernet Status
: Normal connect IP address and connect priority, and live connect IP
address and connect priority.
A duplex recorder priority status displays on a line separate from the IP address.
A Triplex and/or Matrix recorder priority status displays as the last entry of the IP address
such as:
003.018.146.159/3
Click
Status
to refresh or update changes that occurred since the last Status request.
