12
Playing a Tape
Operating Instructions
To Play a Tape
1
. Turn on the TV and tune it to channel 3, 4, or TV’s video input
to see the picture from the VCR.
2
. Insert a tape in the VCR.
VCR automatically turns on. The cassette-in indicator
lights, and the VCR indicator lights if the
Auto TV/VCR
feature
is set to
ON
. The tape automatically begins playback if the
safety tab on the cassette has been removed and the
Auto Play
feature is turned on.
3
. Press
PLAY
on the remote or
PLAY•PAUSE
on the VCR, if
necessary.
PLAY
appears in the VCR’s display panel.
4
. Press
TRACKING
up or down to remove any streaks from the
picture, if necessary. Details are on page 14.
5
. Press
STOP
on the remote or
STOP•EJECT
on the VCR.
6
. Press
REW
.
REW
will appear in the VCR’s display panel.
The VCR will automatically rewind the tape if it reaches the
end of the tape during playback. While rewinding, you can
press
POWER
and the VCR will turn off after rewinding.
7
. Press
STOP•EJECT
on the VCR to eject the tape once it is
completely rewound.
POWER
CHANNEL
STOP • EJECT
TRACKING
RECORD
REW
PLAY • PAUSE
FWD
Safety Tab
