GE H
EALTHCARE
D
IRECTION
FQ091013, R
EVISION
1
V
IVID
I
N
AND
V
IVID
Q
N S
ERVICE
M
ANUAL
7-108
Section 7-6 - Performing Back End Diagnostics on the System
Section 7-6
Performing Back End Diagnostics on the System
The Back End Diagnostics Tests enable you to test the functionality of various Back End hardware
components.
Note:
The Back End Diagnostic Tests may be performed independently, regardless of sequence.
7-6-1
Accessing the Back End Diagnostic Test Options
•
Access the
Diagnostic
Test
window, as described in the
Accessing the Front End Diagnostic
7-6-1-1
Extended Keyboard Test
NOTE:
For a description of this test, refer to the information in the
Extended Keyboard Test on page 7 - 14
1.) In the
Diagnostic
Test
window, trackball to
Extended
Keyboard Test
in the list of
BEP
tests available
for selection from the Diagnostic Test Tree (see
) and press
Set
. The Extended
Keyboard Test name is displayed under
Execute;
the relevant system components to be tested are
highlighted light blue in the Schematic View (BEP, Peripherals, Keyboard), as shown below:
2.) Trackball to the
Start
button and press
Set
.
NOTICE
IMPORTANT
In order to access an individual board test, it is necessary to insert the service dongle from
system boot-up and enter the Service Password.
Figure 7-74 Extended Keyboard Test
Summary of Contents for Vivid in
Page 2: ......
Page 30: ...GE HEALTHCARE DIRECTION FQ091013 REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL xxviii...
Page 739: ......
