GE
D
IRECTION
FQ091019, R
EVISION
2
V
IVID Q
N S
ERVICE
M
ANUAL
3-154
Section 3-10 - Connectivity Setup
3-10-9-3-4
Stopping & Running the Cine-Loop
When a loop is selected, it appears on the screen in
Run-Mode
.
There are several ways to stop a loop and view it frame-by-frame:
•
Clicking on the
Freeze/Run
) will
freeze
the loop. Clicking on same icon
once again will run the loop again.
•
Clicking on the
scrolling
icons (#6 in
) will
stop
the loop, allowing the user to advance
forwards
or
backwards
to the required frame.
•
Using the
left / right
arrows - when the loop is in
Run-Mode
, pressing either the
left
or
right
arrows
on the PC keyboard will
freeze
the loop. Further pressing the left or right arrows will
advance
the
loop frame-by-frame.
3-10-9-3-5
Selecting a Different Patient
Click on the
Back to Patient List
button (#13 in
). On the Patient List, click on the
Exam
Date
of the required patient.
3-10-9-3-6
Exporting Images or Loops from MPEGvue
Using the “Save As…” function, an image may be saved to any of the following file formats:
-
.BMP
-
.WMV (MPEG4)
-
.JPEG
To save an image, click on the diskette icon (#8 in
). A
Save As…
dialog-box will appear,
allowing you to select the desired file format in which to save the image.
3-10-9-3-7
Performing Measurements on MPEGVue Images
The following measurements can be performed on MPEGVue images:
•
Distance and area in 2D images
•
Height, time, and slope in M-mode images
•
Velocity and time in Doppler modes
In a 2D image:
1) Select the
Measurement
tool
(#9 in
).
The distance measurement tool is automatically selected.
2) Perform the distance measurement.
3) To perform an area measurement, right-click on the image and select
Area
. Perform the area
measurement.
In Other Modes:
1) Select the
Measurement
tool
(#9 in
).
2) Perform the measurement.
NOTE:
If the original image contains measurements that were taken and stored on the
Vivid q N scanner, those measurements will appear in the MPEGvue image. In this case,
additional measurements cannot be performed on that image.
NOTE:
Currently, the measurement function is not available on DICOM images/loops, any secondary
captured screens 3D images, or images with discontinuities.
