GE
D
IRECTION
FQ091019, R
EVISION
2
V
IVID Q
N S
ERVICE
M
ANUAL
Chapter 4 - General Procedures and Functional Checks
4-21
10
Perform the
BUTTON ACTIVITY TEST
, as follows:
a.) Change the combo box near the
Front Panel
button
to
Reset to power up conditions
and press the
Front Panel
button
b.) Change the combo box near
Front Panel
button to
Enable transmission
and press the
Front Panel
button.
c.) At the
Indicators
frame set Indicator – ID to the
All
position. Select
ON
and
Activity
.
d.) Press the
Test
Software
button
All 10 Activity green LEDs and KB backlights are seen
with maximal intensity
11
Perform the
STATUS INDICATOR TEST
, as follows:
a.) Check the
Battery green
check box. Press
Set
.
Battery green LED is On
b.) .Uncheck the
Battery green
check box. Check the
Battery yellow
check box
.
Press
Set
Battery yellow LED is On
c.) Uncheck the
Battery yellow
check box. Check the
Extern DC green
check box
.
Press
Set
Extern DC green LED is On
d.) Uncheck the
Extern DC green
check box. Check the
Extern DC yellow
check box
.
Press
Set
Extern DC yellow
LED is On
12
Perform the
LID BUTTON TEST
, as follows:
a.) Press the
Diagnostic Info
button.
b.) Place the test upper cover magnet close to the
Alphanumeric Keyboard Escape button.
The status of the Lid switch is “Open” and changes to
“Closed “after the magnet was placed.
13
Perform the
POWER BUTTON TEST
, as follows:
a.) Press the
Diagnostic Info
button. Press the
Power
button.
The status of the Power Button is “Open” and changes
to “Closed “when the power button is pressed.
b.) Press the
Disconnect
and
Close
buttons to close the
test application.
Table 4-7
External Keyboard Test (cont’d)- Recommended
Step
Task
Expected Result(s)
