GE
D
IRECTION
FQ091019, R
EVISION
2
V
IVID Q
N S
ERVICE
M
ANUAL
Chapter 7 - Diagnostics/Troubleshooting
7-139
7-7-2-1
Formatting a DVD/CD
Prior to exporting logs or any data onto a DVD/CD, the media must be formatted, as described below.
To Format a DVD/CD:
1.) Connect the DVD/CD-RW media drive to the USB port and make sure the DVD/CD-RW power
switch on the rear of the drive is set in the
External
position, as shown in
, below.
2.) Insert the blank DVD/CD media into the DVD/CD-RW drive tray.
3.) On the Vivid q N system, press the
<Config>
key.
4.) Select the
Connectivity
Tab and activate the
Tools
Tab.
5.) Under
Removable Media
, select the media type
CD/DVD Writeable
from the Media drop-down
menu, as shown in
Figure 7-104 Power Switch in External Position
NOTICE
IMPORTANT:
Use only CD-R, DVD-R or DVD+R media from a reputable vendor and only
high-grade media types.
Figure 7-105 Connectivity - Tools - Removable Media
External
Power OFF
Internal
