GE
D
IRECTION
FQ091019, R
EVISION
2
V
IVID Q
N S
ERVICE
M
ANUAL
Chapter 8 - Replacement Procedures
8-139
Figure 8-149 Changing the Name
6.) When done, click somewhere outside the name. The name will then be changed.
7.) Record the Volume’s name on a sticker or a piece of paper and attach it to the drive so that it will
be easier to locate the correct drive in the future.
8.) Use the “Safely Remove Hardware” tool in the Task Bar before continuing with the next step.
9.) Disconnect the USB cable from the laptop or PC.
8-7-2-7
Connecting the External USB Hard Disk to the Vivid q N Scanner
1) Connect the USB cable to a USB port on the Vivid q N scanner.
2.) Turn ON power to the Vivid q N ultrasound scanner.
3.) Under My Computer (refer to
), verify that the drive appears for
selection.
4) Proceed to perform the following functionality tests:
-
