Action
Step
Attach all hoses and cables according to the manual for the WAVE control
unit.
3
Move the unit as far as possible to the side to make room for subsequent
units. Make sure the rubber feet are not pushed over the shelf edge.
4
Continue to place the subsequent units, following the sequence described
in step 1-4.
5
When all (up to three) control units have been placed and connected, arrange
them so that the space between them is as evenly distributed as possible.
Make sure that no cables or hoses are stressed and that hoses are not
blocked due to sharp bends.
6
Connect the power cord to a power outlet with correct voltage.
7
WARNING
Protective ground. The WAVE Cabinet must always
be connected to a grounded power outlet.
WARNING
Access to power switch and power cord. The power
switch must always be easy to disconnect. The power
cord must always be easy to disconnect.
Make sure that the wheels are locked.
8
18
WAVE Cabinet 20/50 User Manual 28-9651-86 AA
4 Installation
4.2 Placing WAVE control units in the cabinet
Summary of Contents for WAVE Cabinet 20
Page 1: ...GE Healthcare WAVE Cabinet 20 50 220 240 V User Manual ...
Page 2: ......
Page 4: ......
Page 23: ......