Consumer S
uppor
t
Tr
oubleshooting Tips
Operating Instructions
Safety Instructions
Installation
Instructions
6
Soil Level
Changing the
SOIL
level increases or decreases the wash time to remove different amounts of soil.
To change the
SOIL
level, press the
SOIL
level button until you have reached the desired setting.
You can choose between Extra Light, Light, Normal, Heavy or Extra Heavy soil.
Spin Speed
Changing the
SPIN
setting changes the final spin speed of the cycles. Always follow the garment
manufacturer’s care label when changing the
SPIN
setting.
To change the
SPIN
setting, press the
SPIN
setting button until you have reached the desired
setting. You can choose between No Spin, Low, Medium, High or Extra High Spin. Higher spin
speeds are not available on certain cycles, such as Delicates.
Higher spin speeds remove more water from the clothes and will help reduce dry time, but may
also increase the possibility of setting wrinkles on some fabrics.
Wash Temp
Adjust to select the proper water temperature for the wash cycle. The rinse water is always cold
to help reduce energy usage and reduce setting of stains and wrinkles.
Follow the fabric manufacturer’s care label when selecting the wash temperature.
To change the wash temperature, press the
TEMP
button until you have reached the desired
setting. You can choose between Tap Cold, Cold, Warm, Hot or Sanitize. The Sanitized wash
temperature is not available on certain cycles, such as Delicates.
When selecting the Sanitize wash temperature, the washer increases the water temperature to
sanitize and kill more than 99% of many common bacteria found in home laundry. The sanitize
wash temperature is only available on the Whites/Heavy Duty wash cycle. For best results, select
the heavy soil setting when using the Sanitize wash temperature setting.
Start/Pause
Press to start a wash cycle. If the washer is running, pressing it once will pause the washer and
unlock the door. This function can be used to add garments during a cycle. Press again to restart
the wash cycle.
NOTE:
If the washer is paused and the cycle is not restarted within 15 minutes, the current wash
cycle will be cancelled.
NOTE:
In some cases the washer will drain first, then unlock the door when it is paused.
NOTE:
The washer performs automatic system checks after pressing the
START/PAUSE
button.
Water will flow in 45 seconds or less. You may hear the door lock and unlock before water flows;
this is normal.
3
4
5
6
Control settings.
