14
SPECIAL FEATURES
OF YOUR OVEN CONTROL
(on models with number pads only)
12 Hour Shut-Off
Cook and Hold
With this feature, should you forget and leave the oven
on, the control will automatically turn off the oven
after 12 hours during baking functions or after 3 hours
during a broil function. If you wish to turn off this
feature, follow the steps below.
1. Press the BAKE and BROIL
HI/LO pads at the same time
for 2 seconds until the display
shows “SF.”
2. Press the DELAY START or
START TIME pad. The display
will show “12 shdn” (12 hour
shut-off). Press the DELAY
START or START TIME pad
again and the display will show
“no shdn” (no shut-off).
3. Press the START pad to
activate the no shut-off and
leave the control set in this
special features mode.
Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after the
cooking function is finished. To activate this feature,
follow the steps below.
1. Press the BAKE and BROIL
HI/LO pads at the same time
for 2 seconds until the display
shows “SF.”
2. Press the COOKING TIME.
pad The display will show
“Hld OFF.” Press the
COOKING TIME pad again
to activate the feature. The
display will show “Hld ON.”
3. Press the START pad to
activate the cook and
hold feature and leave the
control set in this special
features mode.
12 Hour, 24 Hour or Clock Black-Out
Your control is set to use a 12 hour clock. If you would prefer to have
a 24 hour military time clock or black-out the clock display, follow the
steps below.
1. Press the BAKE and BROIL HI/LO pads at the same
time for 2 seconds until the display shows “SF.”
2. Press the CLOCK pad once. The display will
show “12 hr.”
—
Press the CLOCK pad again to change to the 24 hour
military time clock. The display will show “24 hr.”
If this is your choice, press START.
—
Press the CLOCK pad again to black-out the clock
display. The display will show “OFF.” If this is your
choice, press START.
—
If the clock is in the black-out mode and you want to
restore it to the display, repeat steps 1 and 2.
NOTE: If the clock is in the black-out mode you will not be able to use
the Delay Start function.