control network with your primary controller.
- Refer to the instructions for your primary controller to access
the network setup function and include or exclude devices.
- When prompted by your primary controller, tap the button.
- The primary controller should indicate that the action
was successful. If the controller indicates the action was
unsuccessful, please repeat the procedure.
-Once the module is part of the network, the same basic
procedure is used to add the module to groups or scenes.
Refer to the primary controller’s instructions for details.
Please Note:
After a power failure, the 45603 module returns to its
last used
ON/OFF
state.
ADVANCED OPERATION
The following Advanced Operation parameters require that
you have an advanced controller like the model 45601 LCD
remote. Advanced remotes from other manufacturers may
also be able to change these settings; however, basic remotes
do not have this capability.
All On/All Off
Depending upon your primary controller, the 45603 module
can be set to respond to
ALL ON
and
ALL OFF
commands in
up to four different ways. Some controllers may not be able to
change the response from its default setting. Please refer to
your controller’s instructions for information on whether or not
it supports the configuration function and if so, how to change
this setting.
