14
D
GB
F
E
I
96403-08.2019-DGbFEIRu
ATTENTION The oil level must be in the
visible part of the sight glass;
damage to the compressor is
possible if overfilled or
underfilled!
3
|
Areas of application
max.
min.
2.4 Ltr.
Oil level
Fig. 3
~
~
The following refrigerants are approved for the compressor
:
3.3 Oil charge
Refrigerant
Oil grade
R22
FUCHS Reniso SP 46
R134a, R404A, R507, R407C
FUCHS Reniso Triton SE 55
R290, R1270
FUCHS Reniso Synth 68
INFO
Used refrigerant oils have to have a self-ignition temperature of
> 250 °C.
Compressors with ester oil filling (FUCHS Reniso Triton SE 55) are marked with an X in the type
designation (e.g. EX-HG
X
88e/3235-4 3G). Compressors with oil filling FUCHS Reniso Snyth 68
are marked with HC (e.g. EX-HG88e/3235-4 3G
HC
).
Oil level: The oil level from the factory reaches the upper edge of the sight glass. The oil level must
be regulated in operation; if necessary to achieve a correct oil level (see Fig. 4), oil may have to be
drained off or added
.
Operate compressors only with the approved refrigerants and the corresponding assigned and
approved oils. Other combinations (e.g. R22 with ester oils) are not permitted!
Conversion to another refrigerant/oil is not permitted!