!
!
!
Advanced maintenance
Power steering
2018-9015-003
03-2015
● Remove the guiding arm (4) from the
lever (5);
● Unlock the nut (6) and adjust the ball
joint (7);
● When adjusted to the proper length
for connection, apply locktite on the
ball joint threads and lock the
assembly with the nut (6).
4
5
6
7
Step 3: Safety mechanism adjustment
Note!
Make sure the spreader and the tractor wheels are perfectly aligned
before adjusting the safety mechanism.
3
3
4
2
4
1
● Position the parallel bars (1) perpendicular with the flat bar support (2) by
adjusting the eye bolts (3). The springs (4) must be straight, not hanging nor
stretched. Make sure the parallel bars remain perpendicular.
Step 4: Hydraulic flow rate adjustment
Note!
Refer to the instruction manual of the tractor to adjust the hydraulic flow
rate.
Adjustment
The tractor supplies the hydraulic flow rate to the spreader power steering
system. Depending on the spreader and tractor model, the flow rate must be
adjusted as indicated in the following chart.
Hydraulic flow
Spreader model
11 LPM - 15 LPM
EL44-4D
23 LPM - 30 LPM
EL44-6D
