13
Safety
Instructions for the Safe Operation
Setting into Operation
For setting into operation, the following principles apply:
•
Only allow properly qualified staff to set the cleaner into operation.
•
Establish all connections correctly.
•
The safety devices for the cleaner must be complete, fully functional and
in perfect condition. Check the function before starting any work.
•
When the cleaner is switched on, the danger zones must be free.
•
Remove any liquids that have escaped without leaving residues.
Operation
For operation, the following principles apply.
•
Monitor the cleaner during the operation.
•
Safety devices must not be changed, removed or taken out of service.
Check all safety devices at regular intervals.
•
All guards and hoods must be fitted as intended.
•
Structural alterations of the cleaner are not permitted. Immediately report
any changes on the cleaner to the person responsible.
•
Always keep danger zones clear. Do not leave any objects in the danger
zone. Only allow persons to enter the danger zone when the machine is
de-energized.
•
Regularly check that all emergency stop devices are working correctly.
Shutting Down
For shutting down, the following principles apply:
•
Switch off the cleaner via the main switch.
•
Padlock the main switch (if fitted) in the off position to prevent it from
being switched back on. The key to the padlock must be deposited with
the person responsible until the machine is restarted.
•
For longer periods of standstill, observe the storage conditions, see
„Storage“ (Page 20).
Maintenance and Repair
Before starting and maintenance and repair work on the electrical devices of
the cleaner, carry out the following steps in accordance with the "5 safety
rules":
•
Isolate from the power supply
•
Take appropriate measures to prevent switch on
•
Test absence of voltage
•
Earthing and short-circuiting
•
Cover or safeguard any adjacent live parts.
