17
Safety
Residual Risk
Signage
Dangerous points on the control top are indicated by warning signs, prohibition signs
and mandatory signs.
The signs and notes on the control top must always be legible. Any illegible signs must
be replaced immediately.
Residual Risk
Hazard Areas
Please observe the following notes:
•
In the event of malfunctions, shut down the control top (disconnect from the power
and air supply) and secure it against being used.
•
Before starting any service, maintenance or repair work, disconnect the control top
from the power supply and secure it against inadvertently being switched back on
again.
•
Only allow a qualified electrician to carry out any work on the electrical power
supply.
•
Check the electrical equipment of the control top at regular intervals. Immediately
remedy loose connections and molten cables.
•
If work on live parts cannot be avoided, call in a second person, who can operate
the main switch in case of an emergency.
Signs on the Control Top
Sign
Meaning
General hazard warning
Warning Crushing
