4
Transport and storage
4.1
Storage conditions
You must first dry and preserve the control top to prevent damage if the control
top is exposed to temperatures ≤ 0°C during transport or storage.
Hint!
We recommend that the valve should be stored at a temperature of ≥ 5
°C for a period of 24 hours prior to any handling (disassembling the
housings / activation of actuators) so that any ice crystals formed by
condensation water can melt.
4.2
Transport
For transport, the following principles apply:
•
Only use suitable lifting gear and slings for transporting the package units/
control tops.
•
Observe the pictograms on the package.
•
The synthetic materials of the control tops are susceptible to breaking. Take
care when transporting the control top. Do not grip sensitive parts of the unit
to lift or push the unit or to support yourself.
•
The permanent magnet on the switch bar is fragile and must therefore be
protected against mechanical impact.
4.2.1
Scope of supply
After taking delivery of the component, check if
•
the details on the type plate correspond to the data in the order and delivery
documents,
•
the equipment is complete and all components are in good order.
Transport and storage
Storage conditions
430BAL010697EN_2
22
15.04.2020
Summary of Contents for T.VIS M-15
