Description
13
cover is closed. As soon as the cover is opened again, the ventilation unit
resumes operation in the most recently set operating mode.
Menu items
The ventilation system has a settings menu. You can set or display the
following items in this menu:
•
Delete errors
•
Switch on WLAN
•
Switch off WLAN
•
Reset WLAN
•
Restart communication processor.
The ‘Switch on WLAN’ menu item is displayed when the WLAN is switched off.
The ‘Switch off WLAN’ menu item is displayed when the WLAN is switched on.
Delete errors
You can delete the errors that have occurred in this menu item.
Enable WLAN
You can enable the WLAN in this menu item.
Disable WLAN
You can disable the WLAN in this menu item.
Reset WLAN
You can reset all of the WLAN settings with the exception of the device name
in this menu item. To this end, the WLAN is disabled, all the saved settings
are deleted and the WLAN is reconfigured. The communication processor is
restarted after a few seconds. The ventilation unit logs on as a software
access point with the original password, as it did during initial commissioning
process, and can be reconfigured.
Restart communication processor
You can restart the communication processor in this menu item (e.g. if there
are problems with the WLAN connection). You do not have to disconnect the
ventilation system from the power supply during this process.