49
GEAppliances.com
Problem
Possible Causes
What To Do
Display goes blank
A fuse in your home may be
• Replace the fuse or reset the circuit breaker.
blown or the circuit
breaker tripped.
The clock is turned off so that it
• See the
Using the clock and timer
section.
does not show in the display.
Display flashes
Power failure.
• Reset the clock.
Unable to get the
Oven control pads were
• The
Bake
and
Broil Hi/Lo
pads must be touched at
display to show “SF”
not touched properly.
the same time and held for 3 seconds.
Power outage,
Power outage or surge.
• Reset the clock. If the oven was in use, you must reset
clock flashes
it by touching the
Clear/Off
pad, setting the clock and
resetting any cooking function.
“Burning” or “oily” odor
This is normal in a new oven
• To speed the process, set a self-clean cycle for a
emitting from the vent
and will disappear in time.
minimum of 3 hours. See the
Using the self-cleaning
oven
section.
Strong odor
An odor from the insulation
• This is temporary.
around the inside of the oven
is normal for the first few times
the oven is used.
Fan noise
A cooling fan may automatically
• This is normal. The cooling fan will turn off and on.
turn on and off to cool
internal parts.
Drawer does not slide
The drawer is out of alignment.
• Fully extend the drawer and push it all the way in.
smoothly or drags
See the
Care and cleaning of the range
section.
Drawer is over-loaded or load
• Reduce weight. Redistribute drawer contents.
is unbalanced.
Consumer S
uppor
t
Operating Instructions
Safety Instructions
Installation
Instructions
Tr
oubleshooting Tips
Summary of Contents for Adora JGBP87SEMSS
Page 52: ...52 ...