Preparing for Vacation
For long vacations or absences, remove food
and unplug the refrigerator. Clean the interior
with a baking soda solution of one tablespoon
(15 ml) of baking soda to one quart (1 liter) of
water. Leave the doors open.
Preparing to Move
Remove food and unplug the refrigerator.
Secure all loose items such as shelves and
drawers by taping them securely in place to
prevent damage.
Be sure the refrigerator stays in an upright
position during moving.
7
GEAppliances.com
Replacing the LED Light
The LED light is located behind a light lens in
the celling of the refrigerator section.
1. Remove the top shelf (if necessary).
2. Drop down the control housing assemlby.
3. Remove the light lens by using a flat head
screwdriver to push one of tabs down. The
lens snaps in and out.
4. Slide the LED assembly from the mounting
slot.
5. Gently pull the leads out and disconnect
from the control housing assembly.
6. Replace with new LED assembly and slide
assembly back into the mounting slot.
7. Replace the light lens by snapping it into
place.
8. To order the LED assembly, please
call GE Appliances at 800.GE.CARES
(800.492.2737) during normal business
hours.
Light
Lens
LED Assy.
Tabs snap
here
Summary of Contents for GPE12
Page 15: ...15 Notes GEAppliances com ...
Page 47: ...47 Notas GEAppliances com ...
Page 48: ...48 Notas ...
Page 49: ...49 Notas GEAppliances com ...