Your Touch Control Panel
The Touch Control Panel allows
you to set the oven controls with
the touch of a finger. It’s designed
to be easy to use and understand.
When You Plug in
the Oven
The display panel displays five 8’s,
“18 POWER” and
of the oven
functions. After 15 seconds,
lights disappear and “RESET”
appears in the upper portion.
Touch the CLEAR/OFF pad,
set the Clock and oven is ready
use.
power is disrupted at any time,
the above sequence recurs, and you
must reset Clock after touching the
CLEAR/OFF pad.
1. DISPLAY. Displays time of
day, time counting down during
cooking functions, power level,
cooking mode and instructions.
2. TIME COOK I & II. Microwave
for selected amount of time using
automatic power level 10 (High).
3. POWER LEVEL. Touch this
pad after you enter the cooking
time if you want to change from
automatic power level 10 (High)
for cooking or power level 3 (Low)
for defrosting.
Program Cooking
4.
TIMER. This feature
uses no microwave energy. It
functions as a kitchen timer, as a
holding period after defrost or as a
timer before time cooking.
5. NUMBER PADS. Touch these
pads to enter cooking/defrosting
time, power level and time of day.
6. START. After
selections are
made, touch this pad to start oven.
7. TIME DEFROST. Gentle
thawing at automatic power level
3 (Low).
8. CLOCK. Touch this pad to enter
time of day or check time of day
while microwaving.
To set clock, first touch CLOCK
pad and then enter time of day. For
example, if time is 1
touch
number pads 3, and O and “ 1
will appear in display. Then touch
START pad. To reset or change
time, simply repeat this process.
9.
When touched, it
shuts off the oven and erases
settings (except time of day).
Use your Touch ”Control Panel to
Create your own programs to suit
Time Defrost or Time Cook with
your individual cooking style. For
choice of power levels from 1
example: use the
Timer to
(lowest) to 10 (highest), time
delay the start of Time Cook I & II
kitchen tasks with the
or program a hold time between
Timer, and set the clock.
Time Defrost and Time Cook
I & 11. Set Time Cook I & II for a
two-stage program using different
times and power levels.
Summary of Contents for JEM21K
Page 26: ...26 ...