GEAppliances JSP26, Use And Care Manual

G 

(continued)

After 

You 

 notice some white ash in the oven. 

 wipe

If the shelves have 

 hard to slide, wipe the

it up with a damp cloth after the oven cools.

shelf supports with cooking oil.

If 

 spots remain, remove 

 with a soap

NOTE: No functions can be programmed before the

 steel wool pad. Be sure to rinse thoroughly

door automatically unlocks.

with a vinegar and 

 mixture. These deposits

are usually a 

 residue that cannot be removed

by the clean cycle.

 the 

 is not clean after one clean cycle,

repeat the cycle.

 to Set 

 Start 

of 

1. Press the 

 SELF CLEAN pad.

2. Press the 

 or DECREASE pad

until the desired Clean Time 

3. Press the STOP 

 pad.

4. Press the 

 or DECREASE pad until

the 

 Stop 

 in the 

Delay Start is setting the oven timer to 

 the clean

cycle automatically at a later time than the present
time of day.
NOTE: Before beginning, make sure the oven clock
shows the correct time of day.
1. Follow the 

 in the Before a 

Cycle section.

 2. 

After closing the door, press 

CLEAN

SELF CLEAN 

pad.

A

3. Press the 

 or 

pad   enter Clean Time.

4. Press the 

 pad. “STOP

 and the earliest Stop Time you

A

can set will appear in 

 display.

The earliest Stop 

 will be the Clean Time

selected plus the time of day. For

   the

Clean Time is three hours and the time of day is 
the Stop Time that appears in the display will be 

2 6

5. Press the INCREASE pad to change the Stop Time

to a later time of day if desired. For 

 If

you set Stop Time at 

 oven will start clean

cycle at 

 and end at 

 The door latches

automatically.

The self-clean cycle will automatically begin after

 is displayed and the time for clean cycle

is set. The words “ON” and “LOCK” will appear
in the display when the door automatically locks.
It will not be possible to open the oven door until
the 

 drops below the lock temperature

and the LOCK 

 goes off.

6. 

 the LOCK light is off, open the door.

NOTE:

● 

During a delayed 

 operation you

CLEAN

can 

find out when the oven is set to turn

on by 

 and holding the 

SELF 

 pad for 3 seconds.

● 

A fan may automatically turn on and off to cool

 pros. This is 

 and the fan may

continue to run after the oven is 

 off.

—