●
USE THIS PROBLEM SOLVER
PROBLEM
A NUMBER”
FLASH
THE DISPLAY
OVEN
NOT WORK
OVEN LIGHT
:
:
DOES NOT WORK .
FOOD DOES
. .
BROIL
FOOD DOES NOT ROAST
OR BAKE PROPERLY
CLOCK AND
DO NOT WORK
SURFACE
NOT
OVEN
SELF-CLEAN
DOOR
NOT OPEN
OVEN NOT
CYCLE
“door” APPEARS
THE DISPLAY
CAUSE
is
error code. Press
the
pad. Allow the oven to cool
*hour.
the oven back
operation. If function error
again,
power to
oven and
for service.
The plug on the range is not completely inserted in the
circuit breaker in your house
been tripped, a fuse has been blown.
oven controls are not properly set.
●
or replace.
●
:W
oven
broken. Call
service.
●
@~
not set properly. See the Broiling section.
●
Door
left
open to the
broil stop position as
●
shelf position being used.
the Broiling Guide.
●
Food is being cooked on a hot
●
Cookware is not
for broiling.
. Low voltage.
the Broiling section.
●
foil used on
broiler pan and
has not been
properly
and
as
●
controls not set properly. See the Baking Roasting section.
●
Imposition is incorrect. See
Roasting
section.
cookware or cookware of improper size is being used. .
●
●
thermostat
See the Adjust
Oven
-
●
Make sure
plug is plugged into live, properly grounded power
for a
outage.
●
See the Oven Control,
Clock and Timer
●
Surface units are not plugged in solidly.
●
Surface unit
are not properly set.
●
is too high to set self-clean operation.
the
to cool to room temperature and reset the controls.
●
the temperature has fallen below the locking temperature
door can be opened.
●
Oven controls not set properly. See the Operating the Self-Cleaning
section.
●
soiled ovens
to
Time.
●
should be cleaned up before starting the clean cycle.
Oven door is not closed after
self-clean cycle is selected.
Door is still
and you are trying to enter an oven cooking operation.
next
33
