background image

 to 

Set 

 Start and Automatic Stop

Quick Reminder:

1. 

 the COOK TIME button.

2. Turn the SET knob   

 the cooking time.

 Push 

 STOP TIME button.

 

 the SET knob until 

 desired Stop Time

appears in the display.

5. 

 the BAKE button.

 

 the SET knob to select the oven

temperature.

 avoid possible burns, place 

 shelves in the

correct 

 

 

 turn the oven on.

Y

OLI 

can set the oven control to delay-start the oven,

cook for   specific 

   time 

 then turn 

automatically.

For example:  Let’s 

 it’s 

 and dinner time is

shortly 

 7:()(). The 

 

 suggests   hours 

time at 

 

 how:

COOK

1. 

 the 

COOK TIME button.

TIME

SET

2. For   hours   cooking time, turn

the SET knob until 

 appears

in the display.

STOP

3. 

Push the STOP TIME button.

TIME

 Set the Stop Time by turning the SET knob until

 appears in the display.

BAKE

5. Push the BAKE button.

6. Turn the SET knob until “325°” is displayed.

At 

 the oven will turn 

 automatically. The

oven will continue to cook 

 the programmed

 hours and shut off automatically   

7. Remove 

 food from the oven. Remember, even

 the oven shuts off’ automatically, 

 cooking after the controls are off.

NOTE:

● 

When setting your oven for a delay start, never 

foods such as dairy products, fish, meat, poultry, etc.
sit for more than one hour before actual cooking
begins. Room temperature promotes the growth of

harmful bacteria. Be sure the oven light is off because
heat from the bulb will speed bacteria growth.

● 

Push the STOP TIME button to find out when the end

of cycle tone will sound and the oven 

 turn off.

● 

 the CLOCK button to display the time of day

without canceling the oven operation.

ADJUST THE OVEN 

 

 YOURSELF!

You may feel that your new oven cooks differently

2. Select   oven temperature between 

 and

than the one   replaced. We recommend that you

 with the SET knob.

use 

 new’ 

 

   few weeks to become more

familiar with it, following the times given in your

3. immediately, before “BAKE” appears, push

 as a guide.

and hold the BAKE button for about   seconds.
The time display will change to the oven

If you think your new oven is too hot or too cold,

adjustment display.

you 

 adjust the thermostat yourself.  If’ you think

it is too hot, adjust the thermostat to make it cooler. It’

4. The oven temperature can be adjusted 

 to

y

OLI 

think it is too cool, adjust the thermostat to make

(+) 35°F. hotter or (–) 35°F. cooler.

it 

Turn the SET knob to adjust the temperature in

We do not recommend the use of inexpensive

5°F. increments.

thermometers,  such as those found in grocery stores,

 the oven control signals, push the CANCEL

to check the temperature setting 

 your new oven.

button and start over.

These thermometers may vary 20–40 degrees.

5. When you have made the adjustment, push the

To Adjust the Thermostat:

CLOCK button to go back to the time of 

BAKE

1. Push the BAKE button.

display. Use your oven as you would 

NOTE: This adjustment will not affect the broiling
or self-cleaning temperatures. It 

 be retained in

memory after a power failure.

31

Summary of Contents for JSP68





















































Reviews: