background image

18

350A4502P760

GE Appliances Website 

GEAppliances.ca

Have a question or need assistance with your appliance? Try the GE Appliances Website 24 hours a day,  

any day of the year! For greater convenience and faster service, you can now download Owner’s Manuals, 

order parts or even schedule service on-line .

Schedule Service 

GEAppliances.ca

Expert Mabe repair service is only one step away from your door . Get on-line and schedule your service at 

your convenience any day of the year! Or call 800.561.3344 during normal business hours.

Parts and Accessories  

GEAppliances.ca

Individuals qualified to service their own appliances can have parts or accessories sent directly to their 

homes (VISA and MasterCard are accepted). Order by phone at 800.661.1616 during normal business hours.

Instructions contained in this manual cover procedures to be performed by any user. Other servicing 

generally should be referred to qualified service personnel. Caution must be exercised, since improper 

servicing may cause unsafe operation.

Contact Us   

GEAppliances.ca

If you are not satisfied with the service you receive from GE, contact us on our Website with all the details 

including your phone number, or write to:    General Manager, Customer Relations

 

MC Commercial Inc . 

Suite 310, 1 Factory Lane 

Moncton, N .B . E1C 9M3

Register Your Appliance 

GEAppliances.ca

Register your new appliance on-line—at your convenience! 

Timely product registration will allow for 

enhanced communication and prompt service under the terms of your warranty, should the need arise .  

You may also mail in the pre-printed registration card included in the packing material.

Consumer Support. 

Summary of Contents for JVE330



















Reviews: