2
Installation Instructions
TRANSFER TOP HINGE TO
THE LEFT
3
TRANSFER BOTTOM HINGE
TO THE LEFT
REVERSING THE DOOR SWING
(CONT.)
TRANSFER CENTER HINGE
TO THE LEFT
4
7
plug buttons
Remove the plug buttons carefully with a thin-
blade screwdriver.
Reinstall the plug buttons on the right side by
inserting them into the holes vacated by the top
hinge screws.
Reassemble the top hinge on the left side,
turning the screws just enough to hold the
hinge in place.
Remove the supporting leg from the bottom of
the refrigerator and the screws that hold the
bottom hinge.
Reassemble the hinge on the left side of the
cabinet in the same manner, reversing the hinge
180° so that it holds the door in the correct
position with the notch on the hinge facing
inwards.
ATTENTION: The screws must be properly
tightened. Turn the screws until snug. Then
tighten the screws a minimum of one full turn
using both hands.
Remove the two plug buttons on the opposite
side.
Remove the centre hinge and screws.
Rotate the hinge 180° so the pin is on the left
side then mount the hinge on the left.
CAUTION: When assembled correctly, the hinge
is tight against the cabinet.
ATTENTION: The screws must be properly
tightened. Turn the screws until snug. Then
tighten the screws a minimum of 1/2 turn using
both hands.
