GEAppliances PCB900 Owner'S Manual Download

Page: 31 / 50

Do not use a steel wool pad; it will

scratch the surface.
To clean the stainless steel surface, use

warm, sudsy water or a stainless steel

cleaner or polish. Always wipe the surface

in the direction of the grain. Follow the

cleaner instructions for cleaning the

stainless steel surface.

To inquire about purchasing stainless steel

appliance cleaner or polish or to find the

location of a dealer nearest you, please

call our toll-free number:
National Parts Centre 1.800.661.1616
www.GEAppliances.ca

Stainless Steel Surfaces

(on some models)

Be sure all controls are off and all surfaces are cool before cleaning any part of the range.

If your range is removed for cleaning, servicing or any

reason, be sure the anti-tip device is reengaged properly

when the range is replaced. Failure to take this precaution

could result in tipping of the range and cause injury.

Control Panel

If desired, the touch pads may be deactivated

before cleaning.
See the Control Lockout information in the Using

the clock, kitchen timer and control lockout

section in this manual.

Clean up splatters with a damp cloth.
You may also use a glass cleaner.
Remove heavier soil with warm, soapy water.

Do not use abrasives of any kind.
Reactivate the touch pads after cleaning.

Painted Surfaces

Painted surfaces include the sides of the range

and the door, top of control panel and the

drawer front. Clean these with soap and water

or a vinegar and water solution.

Do not use commercial oven cleaners, cleaning

powders, steel wool or harsh abrasives on any

painted surface.

How to Remove Protective Shipping Film and Packaging Tape

Carefully grasp a corner of the protective

shipping film with your fingers and slowly peel

it from the appliance surface. Do not use any

sharp items to remove the film. Remove all

of the film before using the appliance

for the first time.

To ensure no damage is done to the finish

of the product, the safest way to remove

the adhesive from packaging tape on new

appliances is an application of a household

liquid dishwashing detergent. Apply with a soft

cloth and allow to soak.
NOTE: The adhesive must be removed from all

parts. It cannot be removed if it is baked on.

Control Knobs

The control knobs may be removed for easier

cleaning.
Make sure the knobs are in the OFF positions

and pull them straight off the stems for

cleaning.

The knobs can be cleaned in a dishwasher or

they may also be washed with soap and water.

Make sure the inside of the knobs are dry

before replacing.
Replace the knobs, in the OFF position to

ensure proper placement.

Porcelain Enamel Cooktop

(on some models)

The porcelain enamel finish is sturdy

but breakable if misused. This finish is

acid-resistant. However, any acidic foods

spilled (such as fruit juices, tomato or

vinegar) should not be permitted to

remain on the finish.
If acids spill on the cooktop while it is hot,

use a dry paper towel or cloth to wipe it up

right away. When the surface has cooled,

wash with soap and water. Rinse well.
For other spills such as fat spatterings,

wash with soap and water or cleansing

powders after the surface has cooled.

Rinse well. Polish with a dry cloth.

Care and cleaning of the range.

WARNING

www.GEAppliances.ca

Safety

Instruction

Operating

Instructions

and
Cleanin

Troubleshooting

Tip
s
Consumer

Suppo
rt

Care and Cleaning

Summary of Contents for PCB900



















































Search results

Summary of Contents for PCB900

Reviews:

Related manuals for PCB900

Brands by name

Popular brands

GEAppliances PCB900, Owner'S Manual

Search results

Summary of Contents for PCB900

Reviews:

Related manuals for PCB900

Brands by name

Popular brands