Door ice bin*
1. Open left fresh food door.
2. Pull down latch to release bin door.
3. Using handhold lift ice bucket up
and out to clear locators in bottom
of bin.
4. To replace the ice bucket, set it on
the guide brackets and push until
the ice bucket seats properly.
5. If bucket cannot be replaced,
rotate the Ice Bucket Fork 1/4 turn
clockwise.
Drop down dairy bin*
1. Open right fresh food
2. Depress both buttons on lower sides
and bin will drop down.
3. Reverse to reinstall.
Ice/water filter
Remove filter/bypass plug
Push the indent on the cover and pull
open filter door fully. Rotate the filter/
bypass plug as far as it will go and pull
the filter/bypass plug toward you to
remove.
Installing the filter cartridge
Push the new filter/bypass plug straight
in aligning the lugs with the notches
in cabinet and rotate the filter/bypass
plug into the recess in the cabinet. Make
sure the front of the filter is toward the
interior of the refrigerator.
Close the cover making sure the indent
snaps into position.
Drop down tray
(tray open)
Ice bucket
Latch
About the features.*
*Select Models Only
Push in and
pull open
Scalding Hazard.*
Use of the hot water dispenser prior to purging
air from the system may result in spurting of hot
water and lead to hot water scalding. Follow the
instructions for Water Filter - Step 3 on page
15 to purge all air from the system through the
cold water dispenser prior to using the hot water
dispenser.
The first time the hot water feature is used,
confirm if you live above 5000 feet (high
altitude). This limits the temperature of the
hot water system to avoid boiling. To access
the high altitude selection, see
About the
controls-features
.
Filter Bypass Plug
To reduce the risk of property damage due to
water leakage, you
MUST
use the filter bypass
plug when a replacement filter cartridge is not
available. The dispenser and icemaker will not
operate without either the filter or bypass plug
installed. The bypass plug is installed in the same
way as a filter cartridge.
095
