REVERSING THE DOOR SWING
(continued)
TRANSFER FREEZER DOOR HANDLE TO THE RIGHT
• Remove the screw on the bottom of the
handle.
• Remove the handle insert and remove the
screw holding the handle.
• Remove the two screws holding the handle to
the bottom of the door.
• Remove the handle.
• Remove the screws from the right edge of the
door and insert them into the handle screw holes
on the left side.
• Remove the plug button from the left edge of
the door and insert it into the hole on the
opposite side.
• Attach the handle to the right side of the door,
reversing the above procedure.
2
Move the metal door stop on each door from
the right end to the left end.
a. Make sure the
washer(s) are in
place on the
bottom hinge pin.
b. Place the fresh
food door on the
bottom hinge and
position it under
the center hinge.
Drop the hinge pin
into the center
hinge to hold the
door in place and
tighten the screw.
TRANSFER DOOR STOPS
ALIGN THE DOORS
REHANG FRESH FOOD DOOR
a. Place the
washer(s) on the
center hinge pin.
b. Place the
freezer door on
the center hinge
over the pin.
c. Raise the top
hinge by hand and
insert the pivot pin
into the hole in the
door. Then swing
the door shut.
a. Align the
freezer door
with the fresh
food door so
that the gap
between the
doors is even.
b. Tighten
the top hinge
screws by
turning them
until snug.
Then turn the
screws a
minimum of
1/2 turn using
both hands.
REHANG FREEZER DOOR
12
Door Stop
Left Side
Right Side
Align the doors so
that the gap between
them is even.
Washers
Left Side
Right Side
Summary of Contents for UseandCareGuide
Page 18: ...18 NOTES ...
Page 36: ...18 NOTES ...
