4
User Manual | SoundOrb Aurora | GEAR4
speed, make sure the light switch at the
back of the Sub-Woofer is set to GLOW
and turn the dial to increase / decrease
the colour change speed.
–
Fixed:
the ambient light will be on in one
colour. To set the colour, make sure the
light switch at the back of the Sub-Woofer
is set to FIXED and turn the dial to cycle
through colours.
N.B. The Sub-Woofer is powered on/off by
pressing on the Main Unit or remote control.
It must be powered on for the light to work.
Trouble shooting:
■
i am getting interference from other
wireless devices (e.g. wireless
broadband routers).
– Switch the Main Unit and Sub-Woofer off
and then on again at the back of the units.
– Make sure that any other wireless
equipment in your house is more than 1
metre away from the Main Unit and
Sub-Woofer.
■
i am using the TV function, but audio
is not playing through the Main unit.
– Check the RCA cables are plugged
into the right colour ports.
– Check your TV settings to ensure that
audio is diverted via the RCA ports.
■
i am trying to watch video from my iPod
on my TV, but there is no video playing.
– Check that your TV has the right input
selected.
– Check the RCA cables are plugged into
the right colour ports (including yellow).
– Check your iPod user manual for how to
play video onto external devices from your
specific model of iPod.
■
There is no sound from the Sub-Woofer
– Check the power switch on the Sub-
Woofer is set to ‘ON’.
– Turn the Main Unit off and on again.
For more trouble shooting tips / FAQs,
please go to www.gear4.com
WARNiNG
To reduce the risk of fire or electric shock,
do not expose this unit to rain or moisture.
CAuTiON
Use of controls or adjustments of performance
or procedures other than those specified may
result in hazardous radiation exposure.
uNPACKiNG ANd iNSTALLATiON
Unpack your unit carefully. We recommend that
you save the packaging in case you ever need
to store your unit. To avoid damage, never place
