3
ATTACH THE PARTS
ATTACH THE PADS
1.
Loosen wing nut on the holder clamp, which is
on the left and right side arm.
2.
Insert the Snare Lmetal rod into the holder
clamp on the left side arm, then insert the Tom
& Module L-metal rod into the holder clamp on
the center pipe and right side arm. Tighten wing
nuts on the holder clamp.
3.
Attach drum pads to the Snare L-Metal rod and
the Tom & Module L-Metal rods then tighten
wing nuts. Repeat for each pad.
ATTACH THE CYMBAL PADS
1.
Loosen wing nut on the holder clamp on left
pillar, right pillar and left side arm.
2.
Insert each cymbal holder into left pillar, right
pillar, left side arm and tighten wing nut.
3.
Remove wing nut and felt washer from cymbal
holder.
4.
Place cymbal pad on tilter assembly. Re-attach
the felt washer and wing nut. Tighten wing nut.
1
1
2
1
3
4
1
3
2
2
3
HI-HAT
CRASH
RIDE
Summary of Contents for DD400X
Page 1: ...DIGITALDRUMKIT SETUPGUIDE DD400X...
Page 5: ......