4
TOM DRUM ASSEMBLY
Your tom tom drum will arrive already set up and
just needs mounting to your bass drum.
Insert the longest tube of the tom tom arm into the
tom mounting hole on the bass drum. If you are
right-handed have this drum to the right-hand side,
reverse this if you are left-handed.
Unscrew the arm joint, adjusting the angle of the
drum so it is comfortable for the user.
Insert the tom tom drum into the tom arm and
tighten to secure the drum.
SNARE DRUM ASSEMBLY
Your snare drum will arrive set up.
Get your snare drum stand and spread the legs of
the stand. Tighten the screws of the stand so it is
sturdy. Sit the snare into the cradle and tighten the
wing nut so the stand holds the drum in place.
You can angle and adjust the different parts of
the stand so the snare drum sits in a comfortable
position for the player.
CRASH CYMBAL ASSEMBLY
Insert the cymbal arm into the cymbal mounting
hole on the bass drum. Unscrew the wing nut at
the top of the cymbal stand, removing one of
the two felts.
Place the crash cymbal on top of the remaining felt,
then put the first felt back on top of this. Tighten
the wing nut, being careful not to over-tighten the
cymbal. You can adjust the angle of the cymbal by
loosening the screw on the cymbal arm.
Summary of Contents for JUNIOR 3 PIECE DRUM KIT
Page 1: ...JUNIOR3PIECE DRUMKIT SETUPGUIDE...
Page 2: ...JUNIOR 3 PIECE DRUM KIT...
