Installation and Adjustment
Insert USB port of the charging cable to any on USB port
of computer. The indicator LED on USB cable will light on
when charging, and will light off when battery fully charged.
-2-
1.5V AAA
1.5V AAA
1.5V AAA
remote control
use 1.5V *3“AAA”
Quadcopter Charging Instruction
1.Put the telephone rack
into the rack slot on back
of transmitter.
2. Press thr round button on
backside of transmitter and
pull up to take out the rack.
(see the chart)
4.You can rotate the metal
parts which on the side of
telephone rack to adjust the
angle of telephone rack,
then rotate the metal parts
clockwise to fixed it.
3.To lift and shrink the
telephone rack at right position,
and adjust it at suitable width ,
please rotate the metal parts
anticlockwise.Afcer done,please
rotate the metal parts to fix them
clockwise.
