-5-
Wifi FPV Instruction
Flying Preparation
We suggest the beginner to practice within 10 meters.
After you are skillful, you can play in far distance.
According to you mobile phone systems, scanning OR code to download the APP.
Open Setting. Find the unlocked WIFI of quadcopter,and connect it.
Start the APP to enter startup interface,turn on height-locating mode and click "START"
to enter control interface.Viedo display means successful connection.
1: Unfold the quadcopter.
Clockwise rotate the four wings of
quadcopter in turn, stretch the quadcopter
to the flying condition.
(as pictures showed on the right)
2.Syncing the quadcopter
Turning on the quadcopter, keep it in a horizontal position.
Then turn on the transmitter, the bottom four LED lights flash quickly.
Push the throttle lever to the highest position ,then pull it back to the lowest position,
there will be one clear sound from the transmitter, it shows the binding finished.
3.Calibration
Pushing the left lever to bottom left, and push the right lever to bottom right (Two
actions should be executed at the same time.)The bottom four LED lights flash quickly ,
then become bright , it means the calibration succeeded.
Note: Before flying, the quadcopter needs to be calibrated.
5. Low power warning
When the quadcopter is in the low power status, the bottom four LED lights keep
flashing slowly. Quadcopter should be stopped flying and be charged.
APP(IOS)
APP(Android)
4.Unlock
Pushing the left lever to bottom left, and push the right lever to bottom Left (Two actions
should be executed at the same time.)The quadcopter move slowly , it means the
calibration succeeded.