WARNING:
Do not hang, hook, or attach the lantern directly above any person. It
may fall and cause serious injuries.
On/Off
OPERATION
GETTING STARTED
FOLDAWAY
HOOK
•
Easily hang the lantern with the foldaway hook located at the base of the
lantern.
FOLDAWAY HOOK
MAX
WARM
MIN
Switching Modes
• There are 3 different lighting modes:
White Light Modes: Max Bright, Min Bright
Warm Light Mode: Medium
• To switch through the different lighting modes,
press down on the power button to cycle through
the 3 modes.
• To turn the lantern on, press down firmly on the power button until you hear a
click.
• To turn the lantern off, press the power button to cycle through the different
modes until the lantern turns off.
WARNING:
Always follow the battery manufacturer’s instructions as to the proper
usage, handling, storage, and disposal of batteries. Use only batteries from a
reputable manufacturer. Do not mix different brands or types of batteries in the
same flashlight. Replace all batteries at the same time. Failure to follow safety
instructions may result in personal injury and damage to property.
Fig. 1
D Battery Installation
1. Remove the battery compartment cap by holding the lantern upside down and
rotating the base counterclockwise.
TIP: Hold the black section of the lantern while removing the battery cap.
2. Insert three (3) D batteries following the correct polarity (+,-) marked inside the
battery compartment.
3. Secure the battery compartment cap by aligning the 2 poles with the holes in
the base (Fig. 1).
4. Press down firmly on the battery cap, then rotate clockwise to tighten.
WARNING
:
Do not shine the light directly into anyone’s eyes or stare directly into
the LED. Keep away from children.
FOLDAWAY HOOK
POWER BUTTON
COB LED
BATTERY
COMPARTMENT
CAP
HANDLE
