background image

OPERATION

CAUTION:

 The headlamp may become warm or hot after extended periods of 

use at the highest setting.  Select a lower setting when the headlamp is hot.

GETTING STARTED

Note: 

To access the battery compartment, tilt the headlamp down and lift the latch.

AAA Battery Installation

1. Insert 3 AAA batteries following the correct 

polarity (+,-) marked on the battery holder.

2. Close the battery compartment until the

latch clicks into place.

WARNING: 

Always follow the battery manufacturer’s instructions as to the proper 

usage, handling, storage, and disposal of batteries. Use only batteries from a 

reputable manufacturer.  Do not mix different brands or types of batteries in the same 

flashlight. Replace all batteries at the same time. Failure to follow safety instructions 

may result in personal injury and damage to property.

WARNING

:

 

To avoid eye injury, do not stare directly into the light beam or shine the beam directly into 

anyone’s eyes.  Not to be used by children except under adult supervision.  

Fig. 1

Adjustable Light Angle (Fig. 1)

• Tilt the headlamp down to adjust the beam angle and aim the light where it 

   is needed.

• To activate the color side light modes, press down firmly on the left side of the 

   power button      .  Press the side light power button again to cycle through the 

   3 color modes.

• There are 6 different lighting modes:

       White Spot Light Modes: High, Medium, Strobe

       Side Light Modes: White, Red, Green

• To activate the white spot light modes, press down firmly on the right side of the 

   power button       .  Press the spot light power button again to cycle through the 

   3 modes.

WHITE

RED

GREEN

PRESS 3x

PRESS 2x

PRESS 1x

HIGH MEDIUM STROBE

PRESS 3x

PRESS 2x

PRESS 1x

Switching Modes

• To turn the headlamp on, press down firmly on one of the power buttons 

   located on the top of the headlamp until you hear a click.

• To turn the headlamp off, press the same power button again to cycle through 

   the different modes until the headlamp turns off. 

On/Off

• Adjust the length of the head strap to fit your head comfortably.

• To loosen or tighten the head strap, simply slide the strap adjusters forward or 

   backward.

   TIP: For a more comfortable fit, adjust both sides of the head straps evenly.

HEAD STRAP ADJUSTMENT

WHITE LED

COLOR LEDS

BATTERY

COMPARTMENT 

LATCH

ELASTIC

HEAD STRAP

STRAP

ADJUSTERS

SPOT LIGHT

POWER BUTTON

SIDE LIGHT

POWER BUTTON

Reviews: