13 • Setup and Operation (Iss. 01)
SW1
to
SW5
are set in the ON (
) position by default as illustrated in
Figure
7
. Note that settings marked with an asterisk (*) are the default settings.
Figure 7
DIP Switches — Set in the ON Position
Audio Group Configuration
The MUX-9258-A can take in up to four AES inputs and embed them into the
audio channels in an 3G/HD/SD-SDI output.
Use
SW4
and
SW5
in conjunction to assign the AES inputs to the audio groups.
Table 2
outlines how to set the DIP Switches.
Sample Rate Conversion Setup
Table 2 Audio Group Configuration
SW4
SW5
AES 1 and 2
AES 3 and 4
G1
G2
G2
G3
G3
G4
G4
G1
Table 3 SRC Setup
SW1
Description
*
The 48kHz SRC is enabled.
Disables the SRC on all four AES/EBU inputs/
This allows for encoding of Dolby encoded
signals.
ON
