07
02
Main functions and features
• Requires only one person to complete cable continuity check.
• Directly hunt Cat5e/Cat6, telephone wire, coaxial cable, USB cable
and other cables.
• Check wiring error in Cat5e/Cat6, coaxial cable for open circuit,
short circuit, jumper wire, and reverse connection.
• Locate wiring or connection errors.
• Measures cable length and determines the distance of open circuits
and short circuits for LAN cables.
• Dynamically calibrates cable length and length measurement with
up to 98% accuracy.
• Simple and easy to use, with a large display for test results.
• Portable unit with a long battery life (up to 50 hours).
• Automatic time-delay shut off.
• Measures length and pair with or without remote identifier.
• Remote identifier with prompt voice.
• Self-checking function to auto compensate for any changes in
battery capacity or ambient temperature.
Technical Specifications
Dimension
M: 185x105x50mm, R: 218x46x29mm, Remote: 84x34x27mm
Power
9V Battery x 2
LCD Display
4 x 16 Character, Valid visual field 61.6 x 25.2mm
Test Result 4: Open Circuit, Far-End
“R” line “3” and “6” pins displays “X,” which indicates an open
circuit in the far-end plug “3” and “6” pins and the open circuit is
located nearby the far-end plug. (Open point should be at 10%
cable length). Note: detected cable is made of paired cable
cores, “open” error at far-end will always display in pairs, which
means there is one open circuit or both are open in the far-end
“3” and ”6” pins.
“M” line “3” pin displays “X,” which indicates an open circuit in
the near-end plug “3” pin and the open circuit is located nearby
the near-end plug. (Open point should be at 10% cable length).
“I” line “3” pin displays “X,” which indicates an open circuit in the
middle of the “3” pin cable. (Open point should be at 10%-90%
cable length if measured from near-end).
Test Result 5: Open Circuit, Near-End
Test Result 6: Open Circuit, Mid-Cable
