03
06
Compatible Test Cables
STP/UTP cable, coaxial cable.
Detectable Cables
Cat5e/Cat6, telephone wire, coaxial cable, USB cable and other
metal wires.
Ambient Temperature
Working: -10˚C ~ +60˚C
Testing Ports
Master Tester:
RJ45 master port, RJ45 loopback port, RJ45 scanning
port, (RJ45 cable tracing).
Remote Identifier:
RJ45 port. BNC and
RJ11 converters are used to measure and check the continuity of
coaxial cable and telephone line.
Length Measurement or Twin Twisted Cable
Scope: 3 ~ 1,000ft (1~350M)
Calibration Accuracy: 3% (±0.5m/±1.5ft), calibrating cable >33ft.
Shipment Accuracy: 5% (±0.5m/±1.5ft), Class 5 cable.
Display: Meter or Feet
Length Calibration
User can set calibration coefficients with given cable length.
Wire Sequence and Locating Cable Error
Check errors such as open circuit, short circuit, reverse connection,
or crossover.
Auto Time-Delay Shut Off
~30 minutes of inactivity.
Test Result 1: Short Circuit (SHORT)
If any short circuit is found in the cable, the display will read as
follows: (e.g. 12 short circuit)
Push key to restart testing or push key to return to
main menu. Clear “short” error prior to starting further testing.
Pair&L
Test Result 2:
If the cable is not inserted into a local port or is
not properly set into remote identifier, the display will read as
follows:
Push key to restart testing or push key to return to
main menu.
Pair&L
Test Result 3: Normal Wiremap
The tester will automatically detect remote identifier or local port
cable and display wiring diagram (Wiremap) as follows:
R: “Remote Tester” ID: number of Remote Identifier
I : Connecting line between “R” and “M”
M: Main Tester
Push key to restart testing or push key to return to
main menu.
Pair&L